Online pre-registration of user data for ofi-PTS 2012.

We want to pre-register our lab for the experiment series ofi-PTS 2012. After a successful pre-registration you get a PDF Document. Please print out this document and send it back signed via fax to the ofi. Afterwards you get your account data to the system via Email. Due to administration works there might be a delay of max. 5 labour days.


Here you will find the guideline for the registration


Company/Laboratory/Institute:
Lab name: *
Companyname (for billing): *
Web:
Contact:
Style of address:
Title:
First Name:
Surname: *
Phone: *
Fax: *
E-mail: *
Ship the testing samples to the address:
Street/Nr.: *
Street (additional):
ZIP-Code: *
Town, city: *
Country: *
Billing address
Shipping and billing address are the same:
Street: *
Street (additional):
ZIP-Code: *
Town, City: *
Country: *
VAT-Reg.-No.: *
CountryprefixCode
Confirmation per successful performed test method
Confirmation per successful performed test method = z-score <2 (€ 50,00 excl. VAT)
(€ 30,00 excl. VAT for the fourth and any additional confirmation).
One confirmation will be print for each successful performed test method.

Order confirmations:
Provided Tests
Tensile, flexural, and impact properties of plastics
Charpy Impact Strength testing at +23°CISO 179-1
Charpy Impact Strength testing at -20 °CISO 179-1
Charpy notched impact strength incl. notching (1fC)ISO 179-1
Charpy Notched Impact Strength testing at +23 °C incl. specimen notchingISO 179-1
Charpy Notched Impact Strength testing at -20 °C incl. specimen notchingISO 179-1
Dynstat-flexural test - specimens will be cut by participantDIN 53435
Dynstat-impact test - specimens will be cut by participantDIN 53435
Flexural Test on injection moulded thermoplasticsISO 178
Injection moulding of test specimens and tensile testISO 294-1 / ISO 527-1 / ISO 527-2
Instrumented impact puncture testISO 6603-2
Izod impact strength at +23°CISO 180
Izod Notched Impact StrengthISO 180
Tensile Test for Modulus of ElasticityISO 527-1 and ISO 527-2
Tensile Test for yield stress + yield strain, on injection moulded specimensISO 527-1 and ISO 527-2
Tensile-creep modulus at +23°C: E(1min), E(1h), E(100h)ISO 899-1
Hardness and abrasion resistance
Abrasion resistance (Taber, i.e. wear by abrasive wheels)ISO 9352
Ball Indentation HardnessISO 2039-1:2001
Brinell hardness testEN ISO 6506-1
Hardness Shore DISO 868
Intentation hardness by means of Barcol impressorEN 59
Thermal properties, thermal analysis and dynamic mechanical properties of plastics
Coefficient of Linear Thermal Expansion and Glass Transition TemperatureISO 11359-2
Content of carbon blackISO 11358
Dynamic Mechanical Properties in TorsionISO 6721-7 or ISO 6721-2
Flexural vibration - Resonance-curve method (DMA)ISO 6721-3
Glass Transition Temperature (Tg)ISO 11357-2
Oxidation Induction Time (OIT)EN 728 and/or ISO 11357-6
Temperature and Enthalpy of Melting and CrystallizationISO 11357-3
Temperature of Deflection under LoadISO 75-1 and ISO 75-2
VICAT Softening TemperatureISO 306
Properites of plastics in molten state
Complex shear viscosity of polymer meltISO 6721-10
Fluidity of plastics (capillary rheometer)ISO 11443
Melt Flow RateISO 1133
Optical properties
ColorimetryISO 7724-1, ISO 7724-2 and ISO 7724-3
Haze for transparent materialsISO 14782
Specular glossISO 2813:1999
Microscopy
Light microscopy analysis of layer structures
Semi-Quantitative analysis of elements by means of REM-EDX
Surface tension
Contact angle and surface energyISO 15989
Surface tension of liquidsISO 304:1985 and/or EN 14370:2004
Surface tension of liquids - ring as measuring unitEN 14210
Chemical and physico-chemical testing of plastics
Ash Content - method AISO 3451-1
Degree of crosslinking of PE-XISO 10147 or EN 579
DensityISO 1183-1 and ISO 1183-2
Determination of selected elements in polymer matrix by means of XRF- - -
Extractables in PVCISO 6427:1992
Textile-glass ContentISO 1172
Viscosity of a polymer solutionISO 1628-1 and ISO 1628-5
Rubber (unvulcanized, vulcanized or thermoplastic)
Abrasion resistance of a rubber surface using Taber abraderISO 5470-1:1999
Abrasion resistance of rubber using a rotating cylindrical drum deviceISO 4649
Compression setISO 815-1
Density of rubberISO 2781
Hardness Shore AISO 7619-1
Mooney viscosity of unvulcanized rubberISO 289-1:2005
Rubber Hardness IRHD, Method MISO 48
Rubber Hardness IRHD, Method NISO 48 or ISO 7619-2
Tear strength, method B (angle test piece)ISO 34-1
Tear strength. method A (trouser test piece)ISO 34-1
Tensile Test on rubberISO 37
Plastic products - emission and fogging properties
Emission Properties of Plastics - FormaldehydeVDA 275 or VW-Audi PV 3925
Emission Properties of Plastics - Total Carbon EmissionVDA 277 or VW-Audi PV 3341
Emission Properties of Plastics - VOC and FOGVDA 278
Fogging characteristics of trim materials in the interiors of automobilesISO 6452:2007
Thin plastic films and other packaging materials
Determination of impact resistance by the free-falling dart methodISO 7765-1
Film Thickness by mechanical scanningISO 4593
Overall migration - iso-octaneprEN 1186-14
Overall migration into 3% acetic acidEN 1186-3
Overall migration into 95% ethanolprEN 1186-14
Oxygen Gas Transmission RateASTM F1927-07
T-peel test on flexible multilayer plastic filmsISO 11339
Tear resistance - Elmendorf methodISO 6383-2
Tear Test - Trouser Tear Method on a plastic filmISO 6383-1
Tensile Test on plastic filmISO 527-1 and ISO 527-3
Water Vapor Transmission RateISO 2528 or ASTM F1249-06 or ISO 15106-2
Plastic sheets for waterproofing
Dimensional stabilityEN 1107-2
Flexible sheets for waterproofing - Tensile propertiesEN 12311-2:2000
Peel resistance of jointsEN 12316-2
Resistance to impactEN 12691
Resistance to tearingEN 12310-2
Resistance to tearing (nail shank)EN 12310-1
Static puncture test (CBR-test) for PEHD-sealing sheeting EN ISO 12236
Plastic pipes and drinking water after contact with plastics
Creep modulus in tension on samples taken from pipes – creep-modulus E1min, E1h, E24h at 23°C ISO 899-1
Pipes made of PVC-U - Restistance against Dichloromethan - Rating of damage EN 580
Plastic Piping Systems - Resistance to Internal PressureISO 1167-1 and ISO 1167-2
Rigid PVC pipes - Differential scanning calorimetry (DSC) method - Measurement of the enthalpy of fusion of crystallites ISO 18373 – 2
Rigid PVC pipes - Differential scanning calorimetry (DSC) method - Measurement of the processing temperature ISO 18373 – 1
Tensile Properties of polyolefin pipesISO 6259-1and ISO 6259-3
Thermoplastic pipes - Ring stiffnessISO 9969
Thermoplastics pipes - creep ratioISO 9967
Thermoplastics pipes - longitudinal reversionISO 2505
Thermplastic pipes: Resistance to external blows - round-the-clock methodEN 744
Thermplastic pipes: Resistance to external blows -staircase methodEN 1411
TOC-ValueEN 1484
Geotextiles and geosynthetics
Geosynthetics - Pyramid Puncture ResistanceEN 14574:2004
Geotextiles - Characteristic opening sizeISO 12956
Geotextiles - Dynamic perforation testISO 13433
Geotextiles - Static puncture testISO 12236
Geotextiles - Thickness at specified pressureISO 9863-1
Geotextiles - Water permeation characteristics normal to the plane, without loadISO 11058
Geotextiles - Wide-width tensile testISO 10319
Mass per unit areaISO 9864
Protection efficiency against impact damageEN ISO 13428
Tensile strength of nonwovensEN 29073-3
Weathering (EN 12224) with following tensile test EN ISO 10319
Rigid cellular plastics and sound insulation materials
Compression behaviour of rigid cellular plasticsEN 826
Dimensional stability under specified temp. and humidity conditionsEN 1604
Dynamic stiffnessISO 9052-1
Heat of combustion (mineral wool)ISO 1716
Short therm water absorption by partial immersionEN 1609
Tensile strength parallel to facesEN 1608
Sports surface properties
Determination of shock absorptionEN 14808
Determination of vertical deformationEN 14809
Slip resistanceEN 13036-4
Tensile properties of synthetic sports surfaces EN 12230
ThicknessEN 1969